Air Tool Safety Precautions

Pneumatic tools are a tree, and tamping machines, air picks, air shovels, air grinders, etc. are all its branches. We all know that there are no two identical leaves in the world, and they are the same. Although they are all startup tools, they have their own characteristics, uses and structures, and the safety precautions to be paid attention to during use are also quite different. Today we will talk about the precautions for each member of the big family of pneumatic tools:

1. Impact air tools
Impact pneumatic tools include: pneumatic picks, pneumatic shovels, pneumatic tamping machines, pneumatic riveting machines, needle beam pneumatic rust removers and other impact pneumatic tools. If the machine is not in contact with the workpiece, it is not allowed to start the machine, so as to avoid the hammer or work tools hitting and hurting people. After stopping the operation, work tools such as shovel heads, shovel heads, Remove the socket head, etc., and the nails used in the pneumatic nailing machine should also be removed to ensure safety.
1.1 Air pick
At present, there are two kinds of pneumatic valves in the air pick, one is in the machine, the operator can start the machine when the operator pushes down the handle, and the other is a start valve that is pressed by hand at the handle, the former uses It is relatively safe, and when using the latter, it must comply with the provisions of (1).
1.2 Air Shovel
No one is allowed in the shovel cutting direction during operation, and barriers should be added for protection if necessary.
1.3 Pneumatic tamping machine
Pneumatic tamping machine is prohibited from tamping metal and other hard objects and working horizontally, so as to avoid the bending of the piston rod. When using, you should pay attention to prevent the feet from being smashed.
1.4 Pneumatic riveting machine
Special attention should be paid to the use and handling of a pneumatic riveting machine whose hammer body can fall out of the machine. During operation, the machine should be pressed with a certain force to prevent the hammer body from flying out and hurting people. When moving the unpackaged machine, the hammer should be The body is taken out to prevent the hammer body from falling and smashing the foot surface. When hot riveting, the socket head should be cooled with water frequently to avoid scalding accident.
1.5 Needle bundle pneumatic rust remover
After opening the intake valve of the pipeline, it is forbidden to face the needle bundle in the direction of someone, so as to avoid accidental injury and accident.